HYDRAULIC GEAR PUMP

PGP511 Pump Selection.Rotation to customer specification.Displacement: 11.0cc/ rev ( 11.0 Litres at 1000 rpm).5/8" SAE A, 9 Tooth spline shaft, Nominal diameter: 5/8” [15.875 mm], J498- 9T 16/32 DP Flat root side fit, 32mm stand out from the face of the flange (with SA2 flange), Torque rating - 86Nm.SAE A 2 Bolt Slotted to take large shaft seal, 2 slotted holes 106.4mm, 82.55mm pilot diameter, 18.7mm flange width.Ports to customer specification.Single pump - side ports only, blank back cover (not portable).Double Nitrile Shaft Seals

Please note: Manufactured by WHP. Delivery time approximately 2-3 days