10 Clues That You're About to Experience Pump Failure

Hydraulic piston pumps are essential components in various industrial and mechanical systems, from heavy machinery to construction equipment. However, like all mechanical parts, pumps are subject to wear and tear, and when they begin to fail, it can lead to costly downtime and repairs. Identifying the warning signs of an impending pump failure can save you time, money, and frustration.

1. Decreased Hydraulic Efficiency

A drop in efficiency is one of the most noticeable signs that your hydraulic pump is beginning to fail. If you notice that your system isn’t generating the same amount of pressure or flow rate as it usually does, this could indicate that the pump's power conversion efficiency has dropped. Efficiency loss can stem from internal wear, worn seals, or a reduction in volumetric efficiency caused by leaks within the pump.

2. Excessive Noise

Piston hydraulic pumps usually operate quietly, aside from normal operational hums. If you start hearing unusual noises such as grinding, squealing, or banging, it could indicate impending pump failure. These noises may be due to cavitation (air bubbles in the fluid), loose or damaged components, improper alignment of pump parts or excessive case drain pressure. Ignoring strange noises could lead to more severe damage and costlier repairs down the road.

3. Elevated Operating Temperatures

When a hydraulic system begins to overheat, it can signal that the pump is under too much strain or is not functioning correctly. Excessive heat can result from increased friction due to worn components, blockages, or an improper oil viscosity that causes the pump to work harder than it should. Monitoring the system’s temperature and addressing heat spikes promptly can help prevent more significant damage to the pump and related equipment from occurring.

4. Unexplained Fluid Leaks

Hydraulic pumps rely on a consistent flow of hydraulic fluid to operate efficiently. If you notice leaks or frequent drops in fluid levels without any apparent cause, your pump may be the source of the problem. Leaking seals, cracked housings, or damaged fittings are common culprits of hydraulic piston pump failures. Small leaks may seem like minor issues at first, but they often indicate a more significant underlying problem with the pump that could lead to complete failure if not addressed. Even an occasional drip can add up to a considerable volume of oil loss over time, on a continuously running system.

5. Decreased Pressure or Inconsistent Flow

A reduction in maximum  system pressure or a fluctuating flow rate can be a good indicator that your pump is about to fail. Pumps are designed to maintain consistency in terms of pressure and flow characteristics and any irregularity in this  could point to internal damage, such as: in piston pumps; worn-out pistons, valveplates, gear pump bodies, bearing faces or cam rings and  vanes in vane pumps. Inconsistent flow may also signal obstructions or issues with pump supply lines, preventing the pump from getting the necessary fluid.

6. Increased Vibration or Movement

If your hydraulic pump begins to vibrate excessively it will be due to the following reasons: internal component wear, cavitation due to poor oil supply or oil aeration due to leaks in the pump supply lines from the tank or insufficient oil in the tank or excessive foam build up in the tank which can be the result of cavitation or air ingress elsewhere within the circuit.

7. Unusual Smells or Smoke

If you detect a burning smell or, in extreme cases, see smoke coming from your pump, this is a major red flag. These warning signs usually indicate that the pump’s components are overheating and that there may be a fluid blockage, reduced lubrication flow, or some other failure, resulting in metal parts grinding against one another and creating excess friction. In the worst-case scenario, this could lead to the pump seizing up completely. If you notice any unusual smells or visible smoke, shut down the system immediately and inspect the pump for damage.

8. Increased Maintenance Frequency

Another hydraulic pump failure is if you find that your hydraulic system requires more frequent maintenance or replacement of parts, it may be a sign that your pump is wearing out faster than expected. Pumps that are approaching failure often force other components to work harder, leading to more frequent breakdowns. Tracking the number of use hours, along with the frequency and cost of repairs, can help you predict when the pump will fail entirely. This allows you to obtain a replacement pump and install it before a complete breakdown occurs.

9. Contaminated Hydraulic Fluid

The quality of hydraulic fluid is critical for pump performance. If you notice that the fluid is becoming discolored, thick, or contains metal particles, the pump’s internal parts are most likely deteriorating. Aeration is another type of contamination to be aware of and look for, which results in bubbles in the fluid. Fluid contamination can result from improper filtration, seal failure, or even breakdowns in all connected hydraulic parts, components, and hoses.

To help prevent potential pump failures, regularly inspect the fluid quality and change it, along with fluid filters, when necessary. It is equally important to check fluid levels and keep tanks properly filled.

10. Longer Start-Up Times

A hydraulic pump that takes longer to reach full pressure or requires more time to start functioning correctly is showing signs of wear and tear. Delayed start-up times can be caused by problems like internal leaks, worn seals, or even air trapped in the system. If you notice that your equipment is not reaching operational capacity as quickly as it used to, it may be time to have the pump inspected for potential issues.

Take Action Before It’s Too Late

If you have noticed any of these signs in your hydraulic pump, don’t wait until the system fails completely. Addressing pump problems sooner rather than later, can save you from costly repairs, extensive downtime, and potential damage to other equipment in your system.

Contact White House Products Ltd. today for high-quality replacement parts, expert advice, and preventative maintenance solutions to keep your hydraulic system running smoothly. We can also assist you with customized hydraulic systems and obtaining the replacement parts you need to keep your system operational.