HYDRAULIC GEAR PUMP

SNP2 - Group 2 Hydraulic Gear Pump.Anti-clockwise Rotation.Displacement: 10.8cc/ rev (10.8 Litres at 1000 rpm).Standard Group 2 1:5 taper shaft with M12 x 1.25 male thread and 3mm wide woodruff key 40.5mm standout from the face of flange.Deutz engine flange two through holes top left & bottom right when viewed from the shaft end 84.85mm centres with a pilot 50mm diameter x 7.2mm high.SAE O ring (UNF) threaded ports: Inlet 1 1/16-12UNF-2B and outlet 7/8-14UNF-2B.Standard blank rear cover.Nitrile Shaft Seals