HYDRAULIC GEAR PUMP

SNP2 - Group 2 Hydraulic Gear Pump.Clockwise Rotation.Displacement: 8.4cc/ rev (8.4 Litres at 1000 rpm).8mm wide & 6.5mm long tang (Spade) drive supplied with a cruciform coupling with a negative 2.7mm standout from the face of flange.Deutz engine flange two through holes top left & bottom right when viewed from the shaft end 84.85mm centres with a pilot 50mm diameter x 7.2mm high.BSP Thread port, Inlet: 1/2 BSP Outlet: 1/2 BSP.Standard blank rear cover.Nitrile Shaft Seals