HYDRAULIC GEAR PUMP

SNP3 - Group 3 Hydraulic Gear Pump.Clockwise Rotation.Displacement: 26.2cc / rev (26.2 Litres at 1000 rpm).Standard Group 3 1:5 taper shaft with M16 x 1.5 male thread and 5mm key, 51mm standout from the face of flange.DIN Group 3, 4 Bolt mounting flange, 102mm x 145mm, with a pilot diameter 105mm x 8mm high.SAE split flange with 4 tapped holes in the shape of a rectangle inlet: 26.19[1.031] x 52.37[2.062], outlet: 22.23[0.875] x 47.63[1.875] (4 holes min. full thread, 20[0.787] deep) Inlet: 3/8 16UNC – 2B outlet: 3/8 16UNC – 2B around a central hole, diameter inlet: 25.4[1.00] PCD, diameter outlet: 19.1[0.752] PCD .Modular Front Section.Nitrile Shaft Seal