HYDRAULIC GEAR PUMP

SNP3 - Group 3 Hydraulic Gear Pump.Clockwise Rotation.Displacement: 55.1cc / rev (55.1 Litres at 1000 rpm).Standard Group 3 1:8 taper shaft (for X and B flange) with M14x1.5 male thread and 4mm wide key, 46.5mm standout from the face of flange.Standard European 4 bolt mounting flange 98.4mm x 128.1mm with a pilot 50.8mm diameter x 5mm high.SAE split flange with 4 tapped holes in the shape of a rectangle inlet: 35.71[1.406] x 69.85[2.750], outlet: 30.18[1.188] x 58.72[2.312] (4 holes min. full thread, 20[0.787] deep) inlet: 1/2 13UNC – 2B, outlet: 7/16 -14UNF - 2B around a central hole, diameter inlet: 38.1[1.500] PCD, diameter outlet: 31.8[1.252] PCD.Modular Front Section.Nitrile Shaft Seal