HYDRAULIC GEAR PUMP

PGP511 Pump Selection.Rotation to customer specification.Displacement: 19.0cc/ rev ( 19.0 Litres at 1000 rpm).European 1:8 Taper shaft, (16.65 mm diameter) with M12x1.5 thread, 4.0mm woodruff key (4x6.5 DIN6888), 39.7mm stand out from the face of the flange (with X36 flange), Torque rating - 198Nm.SAE A 2 Bolt Slotted to take large shaft seal, 2 slotted holes 106.4mm, 82.55mm pilot diameter, 18.7mm flange width.Ports to customer specification.Front pump - side ports only, front section.Double Nitrile Shaft Seals

Please note: Manufactured by WHP. Delivery time approximately 2-3 days